Product Data Sheet   

HCT25134K


Hubbell Wiring Device-Kellems introduces a new hose and cable carrier system. CableTrak™ carriers are designed to provide guidance and protection for hose and cables being utilized between fixed and moving sections of a machine. These carriers are able to perform at high speeds, have excellent chemical and corrosion resistance, require little maintenance and are easy to assemble. These systems also reduce wear and tear on hose and cables caused by the continuous movement and/or flexing of a machine. This improves operating efficiency while reducing downtime and maintenance costs.

Long Lasting Rugged Construction
CableTrak™ carriers are made from a reinforced nylon material that is highly wear resistant and self lubricating. This provides a nonabrasive surface inside the track so that hose and cable jackets are not damaged.

Easy Assembly and Installation
The "flip top: link design of CableTrak™ carriers makes for easier installation and repairs. This design allows hose and cables to be installed through the top of the carrier instead of being pulled through the assembly. This will become important especially if there are fittings or connections already attached at the ends of the hose or cables. CableTrak links can also be easily assembled or disassembled with a flat blade screwdriver.

Easy Ordering
CableTrak™ hose and cable carriers will be available for sale in kits which include three feet of machine travel and mounting brackets and one foot extender sections if additional track is needed. One foot extender sections do not include mounting brackets. When you require solutions to everyday wire management problems, look to Hubbell Wiring Device-Kellems to meet all your needs.

Hubbell Wiring Device-Kellems Product Specifications
 Product Line  
 CableTrak Variety  Assembled Kit with Brackets
 CableTrak Cross Section Internal Width x Internal Height  1.75" x 2.60" w/Bend Radius of 3.40"
 Material  Fiberglass reinforced nylon.
 Operating Temperature  Continuous +20°F - +100°F (-7°C - 38°C).
 Maximum Operating Speed  600 FPM (feet per minute) 180 MPM (meters per minute). Operating speed is based on short lengths that are self supported (up to 9ft.).
 Maximum Self-supported Travel Distance  Total travel without sag 13.5 ft. (4.1m) With sag 17 ft. (5.18m)
 Applications  Machine Tool, Robotic Automation, Material Handling.
 Machine Travel Distance (End Mount)  3ft.
 Machine Travel Distance (Center Mount)  6'
 Track Length  4.5'
 Dimension W (Inner Width)  2.60"
 Dimension H (Inner Height)  1.75"
 Max Hose/Cable O.D.  1.458"
 Max Component Width  2.340"
 Dimension V (Outer Width)  3.70"
 Dimension O (Outer Height)  2.50"
 Dimension R (Bend Radius)  3.40"
 Dimension B (Bend Height)  9.30"
 Dimension C (Clearance)  3.00"
 Dimension K (Brkt. To Bend)  8.31"
 Dimension M (Brkt. to Pivot Point)  1.75"
 Dimension P (Pitch)  2.500"
 Max Cable/Hose O.D.  1.458"
 Max Component(s) Width  2.340"
 Dimension L (Curve Length)  1.500"
 Product Color  Black


Features/Benefits
Features Benefits
• Fiberglass reinforced nylon construction. • Highly wear resistant design that provides excellent chemical and corrosion resistance.
• Flip top link design. • Allows cable and hose to be installed through the top of carrier instead of pulling them through an assembly. This is important where there are large fittings or connections at the ends of cables and hoses.
• Carriers provide guidance and protection for hose and cables being used between fixed and moving parts of a machine. • Loose or damaged cables can pose safety hazards to equipment operators.
• Reduces wear and tear on hose and cables caused by continuous movement. • Improves the operating efficiency of machinery while reducing maintenance and downtime costs.
• Easy assembly • Links can be assembled or disassembled with a flat blade screwdriver. Provides ease of repair or installation.
• Can be used vertically or horizontally. • Allows for full range of motion and flexible installation.









 

Hubbell Wiring Device-Kellems